Ruijie Quick Router Setup

Created by Paul Sillars, Modified on Sat, 19 Aug, 2023 at 4:09 PM by Paul Sillars

1) Modify the IP address of PC.

IP address: 192.168.1.x (except 192.168.1.1)

Subnet mask: 255.255.255.0

Default gateway: 192.168.1.1 (default LAN IP)

2) Connect the PC to any port (except WAN0) on the device.

3) Visit http://192.168.1.1 using web browser. (Ruijie suggests using Chrome)

4) Enter the username and password on the login page and click “Log In”.

Default Username: admin

Default Password: admin

5) Change the password at the first login.

6) Verify if DHCP Server is enabled in LAN (LAN2) in Network -> DHCP

7) Set WAN Port (Port 0) to DHCP in interfaces in Network-> Interface -> WAN0

8) Tick to enable NAT and allow traffic between WAN and LAN under WAN0 Settings in Network-> Interface -> WAN0