Enable VLAN SSID on Ruijie with Network Access Control (Old Version)

Created by Dennis Mercado, Modified on Fri, 12 Jan at 11:06 AM by Dennis Mercado


To Create the Wireless VLAN


1. Add Wireless VLAN


2. Click Add then Add Wireless VLAN



3. Configure the VLAN SSID Wi-FI name, password and encryption.


4. Configure the VLAN ID, Default Gateway and DHCP IP range


5. Click Apply and continue to create the VLAN


6. The Wireless VLAN will also be shown in the SSID settings.



To Create the Network Access Control


With VLANs, they can still communicate if the routing is configured and the other network knows the IP address of the devices. If we want to limit devices not to see the other VLAN, we will need to configure Network Access Control.



1.


2. There are 2 types of zones, Interworking Zone and Isolation Zone.


Interworking Zone - devices on each VLAN network can see each other. We will normally leave the Native VLAN in this group.


Isolation Zone - devices on each VLAN cannot see or connect to each other even if they have routing and know the IP address of the other network




3. Click save to apply the settings.













































Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article