Ubiquiti Mesh Wireless

Created by Dennis Mercado, Modified on Thu, 16 May at 9:57 AM by Dennis Mercado



How to Set up a Unifi Wireless Uplink

https://lazyadmin.nl/home-network/unifi-wireless-uplink/



To setup the AP-AC-M Ubiquiti UniFi AC Mesh AP, we would need to configure it wired to the network using a PoE switch or a PoE injector first then provision and update the firmware. Once it is adopted and the firmware is updated, we can move it to a different location and using a PoE power source, it will create a wireless mesh with the network.


During provisioning, the device should also be on the same network of the controller like the software controller on a computer or a hardware controller.


Ubiquiti Software Controller:

https://ui.com/download/releases/network-server


Useful Links:

https://www.youtube.com/watch?v=s2tOOPwVjxw

https://lazyadmin.nl/home-network/unifi-wireless-uplink/

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article